Pipe Clamp (13)

Mathey Dearman 1220 Quick Fit - PDQ Pipe Clamp 1” - 3” (Mathey QFC12)   4 lbs. 8" x 6" x 5"

Mathey Dearman 1221 Quick Fit - PDQ Pipe Clamp 2” - 6” (Mathey QFC26)   11 lbs. 13" x 9" x 5"

Mathey Dearman 1222 Quick Fit - PDQ Pipe Clamp 6” - 14” (Mathey QFC512)   18 lbs. 15" x 20" x 5"

  Mathey Dearman D104-KIT Hydraulic Flange Spreader Kit (1 Each)                       Hydraulic kit Includes manual hydraulic pump, reservoir and hoses needed for operation

Mathey Dearman D2235 10" - 36" Universal Chain Clamp (1 each)     The Mathey Dearman Universal Chain Clamp's design gives the welder the ability to accurately fit-up, weld and grind the pipe without removal of the clamp. The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process. Replace the chain of the Universal Chain Clamp with stainless steel chain for stainless steel or specialty alloy applications. Available in carbon steel and stainless steel models to fit pipe from 1" to 36" (25mm to 914mm).     Number Of Jackbars: 8 Pipe Range: 10" - 36" Material Type: Carbon Steel Reforms Pipe To Schedule: 20 Aligns Pipe To Schedule: 40 * Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch (3168 kg per square centimeter).* Universal Chain Clamp Includes:     Length of chain required for the pipe diameter specified     Universal jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual       Optional:     Carbon or stainless steel spacing screws (optional)     Add-on jackbar       OPTIONAL:     The level and support device assists the welder in holding and accurately positioning pipe or fittings for welding.     Available in steel and stainless steel models for pipe 1" to 36" (25mm to 914mm) in diameter.       FEATURES:     VERSATILE—Jackbars will pivot on uneven surfaces. One Chain Clamp covers range of eight (8) cage clamps.     PRECISE—Jackbars, spaced around the pipe, provide support and concise alignment of the pipe internal or external diameter within 1/64 of an inch.     SAFE—Jackbars can be moved backward and forward in the jackbar holder as needed for extra support of elbows, tees and other fittings.       NOTE:     Mathey Dearman Chain Clamps can be reconfigured for stainless steel and other specialty alloy applications. Simply replace the carbon steel roller chain with aligning stainless steel pipe. All other components of Chain Clamps are made of stainless steel. Complete welding of the pipe and fittings can be accomplished without removal of the clamp.     Add on jack-bar can be added if pressure needs to be applied between the clamp jackbars.     Jackscrew pads pivot independently to handle uneven surfaces.     Spacing screws can be added for precise weld gap adjustment.       WARNING:     The clamp should never be used as the sole support for the pipe, nor should it ever be used to lift the pipe.     Do not exceed pipe size range listed without first contacting the Mathey Dearman sales department.     Do not use any type of chain other than those listed below without first contacting Mathey Dearman sales department.       Use of chain not supplied with clamp by Mathey Dearman will void the warranty of the clamp.    

Mathey Dearman D2235SS 10" - 36" Stainless Steel Universal Chain Clamp (1 each)     The Mathey Dearman Universal Chain Clamp's design gives the welder the ability to accurately fit-up, weld and grind the pipe without removal of the clamp. The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process. Replace the chain of the Universal Chain Clamp with stainless steel chain for stainless steel or specialty alloy applications. Available in carbon steel and stainless steel models to fit pipe from 1" to 36" (25mm to 914mm).     Number Of Jackbars: 8 Pipe Range: 10" - 36" Material Type: Stainless Steel Reforms Pipe To Schedule: 20 Aligns Pipe To Schedule: 40 * Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch (3168 kg per square centimeter).* Universal Chain Clamp Includes:     Length of chain required for the pipe diameter specified     Universal jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual       Optional:     Carbon or stainless steel spacing screws (optional)     Add-on jackbar       OPTIONAL:     The level and support device assists the welder in holding and accurately positioning pipe or fittings for welding.     Available in steel and stainless steel models for pipe 1" to 36" (25mm to 914mm) in diameter.       FEATURES:     VERSATILE—Jackbars will pivot on uneven surfaces. One Chain Clamp covers range of eight (8) cage clamps.     PRECISE—Jackbars, spaced around the pipe, provide support and concise alignment of the pipe internal or external diameter within 1/64 of an inch.     SAFE—Jackbars can be moved backward and forward in the jackbar holder as needed for extra support of elbows, tees and other fittings.       NOTE:     Mathey Dearman Chain Clamps can be reconfigured for stainless steel and other specialty alloy applications. Simply replace the carbon steel roller chain with aligning stainless steel pipe. All other components of Chain Clamps are made of stainless steel. Complete welding of the pipe and fittings can be accomplished without removal of the clamp.     Add on jack-bar can be added if pressure needs to be applied between the clamp jackbars.     Jackscrew pads pivot independently to handle uneven surfaces.     Spacing screws can be added for precise weld gap adjustment.       WARNING:     The clamp should never be used as the sole support for the pipe, nor should it ever be used to lift the pipe.     Do not exceed pipe size range listed without first contacting the Mathey Dearman sales department.     Do not use any type of chain other than those listed below without first contacting Mathey Dearman sales department.       Use of chain not supplied with clamp by Mathey Dearman will void the warranty of the clamp.    

Mathey Dearman D2249 4" - 16" Universal Chain Clamp (1 each)     The Mathey Dearman Universal Chain Clamp's design gives the welder the ability to accurately fit-up, weld and grind the pipe without removal of the clamp. The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process. Replace the chain of the Universal Chain Clamp with stainless steel chain for stainless steel or specialty alloy applications. Available in carbon steel and stainless steel models to fit pipe from 1" to 36" (25mm to 914mm).     Number Of Jackbars: 7 Pipe Range: 4" - 16" Material Type: Carbon Steel Reforms Pipe To Schedule: 20 Aligns Pipe To Schedule: 40 * Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch (3168 kg per square centimeter).* Universal Chain Clamp Includes:     Length of chain required for the pipe diameter specified     Universal jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual       Optional:     Carbon or stainless steel spacing screws (optional)     Add-on jackbar       OPTIONAL:     The level and support device assists the welder in holding and accurately positioning pipe or fittings for welding.     Available in steel and stainless steel models for pipe 1" to 36" (25mm to 914mm) in diameter.       FEATURES:     VERSATILE—Jackbars will pivot on uneven surfaces. One Chain Clamp covers range of eight (8) cage clamps.     PRECISE—Jackbars, spaced around the pipe, provide support and concise alignment of the pipe internal or external diameter within 1/64 of an inch.     SAFE—Jackbars can be moved backward and forward in the jackbar holder as needed for extra support of elbows, tees and other fittings.       NOTE:     Mathey Dearman Chain Clamps can be reconfigured for stainless steel and other specialty alloy applications. Simply replace the carbon steel roller chain with aligning stainless steel pipe. All other components of Chain Clamps are made of stainless steel. Complete welding of the pipe and fittings can be accomplished without removal of the clamp.     Add on jack-bar can be added if pressure needs to be applied between the clamp jackbars.     Jackscrew pads pivot independently to handle uneven surfaces.     Spacing screws can be added for precise weld gap adjustment.       WARNING:     The clamp should never be used as the sole support for the pipe, nor should it ever be used to lift the pipe.     Do not exceed pipe size range listed without first contacting the Mathey Dearman sales department.     Do not use any type of chain other than those listed below without first contacting Mathey Dearman sales department.       Use of chain not supplied with clamp by Mathey Dearman will void the warranty of the clamp.    

Mathey Dearman D2249SS 4" - 16" Stainless Steel Universal Chain Clamp (1 each)     The Mathey Dearman Universal Chain Clamp's design gives the welder the ability to accurately fit-up, weld and grind the pipe without removal of the clamp. The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process. Replace the chain of the Universal Chain Clamp with stainless steel chain for stainless steel or specialty alloy applications. Available in carbon steel and stainless steel models to fit pipe from 1" to 36" (25mm to 914mm).     Number Of Jackbars: 7 Pipe Range: 4" - 16" Material Type: Stainless Steel Reforms Pipe To Schedule: 20 Aligns Pipe To Schedule: 40 * Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch (3168 kg per square centimeter).* Universal Chain Clamp Includes:     Length of chain required for the pipe diameter specified     Universal jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual       Optional:     Carbon or stainless steel spacing screws (optional)     Add-on jackbar       OPTIONAL:     The level and support device assists the welder in holding and accurately positioning pipe or fittings for welding.     Available in steel and stainless steel models for pipe 1" to 36" (25mm to 914mm) in diameter.       FEATURES:     VERSATILE—Jackbars will pivot on uneven surfaces. One Chain Clamp covers range of eight (8) cage clamps.     PRECISE—Jackbars, spaced around the pipe, provide support and concise alignment of the pipe internal or external diameter within 1/64 of an inch.     SAFE—Jackbars can be moved backward and forward in the jackbar holder as needed for extra support of elbows, tees and other fittings.       NOTE:     Mathey Dearman Chain Clamps can be reconfigured for stainless steel and other specialty alloy applications. Simply replace the carbon steel roller chain with aligning stainless steel pipe. All other components of Chain Clamps are made of stainless steel. Complete welding of the pipe and fittings can be accomplished without removal of the clamp.     Add on jack-bar can be added if pressure needs to be applied between the clamp jackbars.     Jackscrew pads pivot independently to handle uneven surfaces.     Spacing screws can be added for precise weld gap adjustment.       WARNING:     The clamp should never be used as the sole support for the pipe, nor should it ever be used to lift the pipe.     Do not exceed pipe size range listed without first contacting the Mathey Dearman sales department.     Do not use any type of chain other than those listed below without first contacting Mathey Dearman sales department.       Use of chain not supplied with clamp by Mathey Dearman will void the warranty of the clamp.    

Mathey Dearman D2250 1" - 8" Universal Chain Clamp (1 each)     The Mathey Dearman Universal Chain Clamp's design gives the welder the ability to accurately fit-up, weld and grind the pipe without removal of the clamp. The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process. Replace the chain of the Universal Chain Clamp with stainless steel chain for stainless steel or specialty alloy applications. Available in carbon steel and stainless steel models to fit pipe from 1" to 36" (25mm to 914mm).     Number Of Jackbars: 3 Pipe Range: 1" - 8" Material Type: Carbon Steel Reforms Pipe To Schedule: 20 Aligns Pipe To Schedule: 40 * Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch (3168 kg per square centimeter).* Universal Chain Clamp Includes:     Length of chain required for the pipe diameter specified     Universal jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual       Optional:     Carbon or stainless steel spacing screws (optional)     Add-on jackbar       OPTIONAL:     The level and support device assists the welder in holding and accurately positioning pipe or fittings for welding.     Available in steel and stainless steel models for pipe 1" to 36" (25mm to 914mm) in diameter.       FEATURES:     VERSATILE—Jackbars will pivot on uneven surfaces. One Chain Clamp covers range of eight (8) cage clamps.     PRECISE—Jackbars, spaced around the pipe, provide support and concise alignment of the pipe internal or external diameter within 1/64 of an inch.     SAFE—Jackbars can be moved backward and forward in the jackbar holder as needed for extra support of elbows, tees and other fittings.       NOTE:     Mathey Dearman Chain Clamps can be reconfigured for stainless steel and other specialty alloy applications. Simply replace the carbon steel roller chain with aligning stainless steel pipe. All other components of Chain Clamps are made of stainless steel. Complete welding of the pipe and fittings can be accomplished without removal of the clamp.     Add on jack-bar can be added if pressure needs to be applied between the clamp jackbars.     Jackscrew pads pivot independently to handle uneven surfaces.     Spacing screws can be added for precise weld gap adjustment.       WARNING:     The clamp should never be used as the sole support for the pipe, nor should it ever be used to lift the pipe.     Do not exceed pipe size range listed without first contacting the Mathey Dearman sales department.     Do not use any type of chain other than those listed below without first contacting Mathey Dearman sales department.       Use of chain not supplied with clamp by Mathey Dearman will void the warranty of the clamp.    

Mathey Dearman D2250SS 1" - 8" Stainless Steel Universal Chain Clamp (1 each)     The Mathey Dearman Universal Chain Clamp's design gives the welder the ability to accurately fit-up, weld and grind the pipe without removal of the clamp. The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process. Replace the chain of the Universal Chain Clamp with stainless steel chain for stainless steel or specialty alloy applications. Available in carbon steel and stainless steel models to fit pipe from 1" to 36" (25mm to 914mm).     Number Of Jackbars: 3 Pipe Range: 1" - 8" Material Type: Stainless Steel Reforms Pipe To Schedule: 20 Aligns Pipe To Schedule: 40 * Calculations are based on pipe with a tensile strength of 45,000 lbs per square inch (3168 kg per square centimeter).* Universal Chain Clamp Includes:     Length of chain required for the pipe diameter specified     Universal jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual       Optional:     Carbon or stainless steel spacing screws (optional)     Add-on jackbar       OPTIONAL:     The level and support device assists the welder in holding and accurately positioning pipe or fittings for welding.     Available in steel and stainless steel models for pipe 1" to 36" (25mm to 914mm) in diameter.       FEATURES:     VERSATILE—Jackbars will pivot on uneven surfaces. One Chain Clamp covers range of eight (8) cage clamps.     PRECISE—Jackbars, spaced around the pipe, provide support and concise alignment of the pipe internal or external diameter within 1/64 of an inch.     SAFE—Jackbars can be moved backward and forward in the jackbar holder as needed for extra support of elbows, tees and other fittings.       NOTE:     Mathey Dearman Chain Clamps can be reconfigured for stainless steel and other specialty alloy applications. Simply replace the carbon steel roller chain with aligning stainless steel pipe. All other components of Chain Clamps are made of stainless steel. Complete welding of the pipe and fittings can be accomplished without removal of the clamp.     Add on jack-bar can be added if pressure needs to be applied between the clamp jackbars.     Jackscrew pads pivot independently to handle uneven surfaces.     Spacing screws can be added for precise weld gap adjustment.       WARNING:     The clamp should never be used as the sole support for the pipe, nor should it ever be used to lift the pipe.     Do not exceed pipe size range listed without first contacting the Mathey Dearman sales department.     Do not use any type of chain other than those listed below without first contacting Mathey Dearman sales department.       Use of chain not supplied with clamp by Mathey Dearman will void the warranty of the clamp.    

Mathey Dearman D244 2" - 16" Hold Down Clamp (1 Each)The Mathey Dearman Hold Down Clamp holds the pipe in position for cutting or fit-up of pipe or fittings such as flanges, tees, elbows or valves.       Hold Down Clamps safely secure the pipe to a jackstand or table for the fit-up of tees, elbows, flanges and other fittings.     For some applications the Hold Down Clamp is used in conjunction with the level and support device to hold the pipe or fitting in place during the alignment and welding process.         Light weight, easy to install—the D244 Hold Down Clamp has a range of 2"-16" (51-406mm) with an 800 lb working load, and the D245 Hold Down Clamp has a range of 10"-48" (254mm-1219mm) with a 1,300 lb working load. The crank shaft mechanism takes up the slack in the chain to hold the pipe safely and securely with the chain being placed at the base of the V-Head of the jackstand, and not through the legs.  

Mathey Dearman D245 10" - 48" Hold Down Clamp (1 Each)The Mathey Dearman Hold Down Clamp holds the pipe in position for cutting or fit-up of pipe or fittings such as flanges, tees, elbows or valves.       Hold Down Clamps safely secure the pipe to a jackstand or table for the fit-up of tees, elbows, flanges and other fittings.     For some applications the Hold Down Clamp is used in conjunction with the level and support device to hold the pipe or fitting in place during the alignment and welding process.         Light weight, easy to install—the D244 Hold Down Clamp has a range of 2"-16" (51-406mm) with an 800 lb working load, and the D245 Hold Down Clamp has a range of 10"-48" (254mm-1219mm) with a 1,300 lb working load. The crank shaft mechanism takes up the slack in the chain to hold the pipe safely and securely with the chain being placed at the base of the V-Head of the jackstand, and not through the legs.  

Mathey Dearman D249 4" - 20" Double Jackscrew Chain Clamp (1 each) This Mathey Dearman Double Jackscrew Chain Clamp reforms Schedule 40 pipe on either side of the joint to be welded. The jackscrews of the jackbar exert pressure on the high points of both sides of the weld joint to eliminate “Hi-Lo”. Pipe wall thickness up to Schedule 80 can be aligned with the clamp.   The level and support device of the chain clamp allows the pipe, elbow, tee, flange and other fittings to be held safely and securely in place during the alignment and welding process.   For stainless steel or specialty alloy applications replace the chain of the standard chain clamp with stainless steel chain.   Available in steel and stainless steel models to fit pipe from 1" to 54" (25mm to 1372mm).   Number Of Jackbars: 7 Pipe Range: 4" - 16" Material Type: Carbon Steel Reforms Pipe To Schedule: 40 Aligns Pipe To Schedule: 80 NOTE: Complete welding of the pipe and fittings can be accomplished without removal of the clamp. Add-on jackbar can be added if pressure needs to be applied between the clamp jackbars. Jackscrew pads independently pivot to handle uneven surfaces. Spacing screws can be added for precise weld gap adjustment. Double Jackscrew Chain Clamp Includes:     Length of chain required for the pipe range     Double jackscrew jackbars listed for the pipe range     Main block     Fine adjustment     Level and support device     Jackscrew wrench     Storage box     Parts and operating manual     OPTIONAL: • Carbon or stainless steel spacing screws • Add-on Jackbar FEATURES: EXTRA CLEARANCE—Double jackscrew jackbar has extra clearance under the jackbar to better facilitate tig welding torch. CRUCIAL ALIGNMENT—The double jackbars, spaced around the outside diameter of the pipe, provide concise alignment and reforming of the internal or external diameters of both pipes within 1/64 of an inch. SAFE—Elbows, tees and other fittings can be held safely and securely in place during alignment with the level and support device. VERSATILE—The Chain Clamp can be used to support, align, and reform elbow, tees and other fittings that a cage clamp can not manage. One Chain Clamp covers the range of eight (8) cage clamps. READILY REFORMS pipes on both sides of the weld joint to Schedule 40 pipe and aligns Schedule 80 pipes, elbows, tees and other fittings.