Stick Welding (23)

Electrode Holder Parts for AF-3; HT-3; AF-35; HT-35; AF-50; HT-50

Lenco Duro 250-I Light Duty Electrode Holder; Electrode Capacity: 7/32 Inch; Cable Size: 1/0 AWG; Amperage Rating: 250A; Dimension: 9-1/2 Inch Length

LE AF/HT Electrode Holders, 250A, Nylon/Glass, For 1/0 Cable, 5/32" Cap., 8.25"L

Upper and lower tongs are made from a high copper alloy for maximum conductivity and strength Top and bottom tip insulators are a molded fiberglass compound and will withstand intensive heat impact Handles are molded from a durable glass filled nylon material with a good heat and impact resistance Oval-point screw cable connection is standard on all models

Upper and lower tongs are made from a high copper alloy for maximum conductivity and strength Top and bottom tip insulators are a molded fiberglass compound and will withstand intensive heat impact Handles are molded from a durable glass filled nylon material with a good heat and impact resistance Oval-point screw cable connection is standard on all models

Postive grip jaws hold electrodes tight;No coil spring to lose tension;Safe, square guard protects hands from heat, prevents rolling and grounding when set down.

Duro Holders, 300 A, For 2/0 Cable, 1/4 in Capacity, 11 5/8 in L

LE AF/HT Electrode Holders, 250 A, For 1/0 Cable, 5/32 in Capacity, 9 in L

HT-25 model Durable tip insulators are molded from a high impact/high temperature fiberglass compound and will withstand intensive heat and impact The upper lever is fully insulated Powerful spring holds the electrode securely in place and prevents electrode slippage, the spring is protected by a Lexan cup insulator Specially designed oval-point screw makes it easy to install our holder on a cable Just strip off the appropriate length of cable insulation and insert it into the holder body, then tighten down the large oval-point screw with an allen wrench The handle retention screw is upset to prevent removal The oval-point screw cable connection is standard on all models

LE AF/HT Electrode Holders, 350 A, For 2/0 Cable, 1/4 in Capacity, 10 1/2 in L

LE AF/HT Electrode Holders, 400 A, For 3/0 Cable, 1/4 in Capacity, 10 1/2 in L

Handles are molded from a durable glass filled nylon material with a good heat and impact resistance Oval-point screw cable connection is standard on all models Top and bottom tip insulators are a molded fiberglass compound and will withstand intensive heat impact Upper and lower tongs are made from a high copper alloy for maximum conductivity and strength

LE AF/HT Electrode Holders, 500 A, For 4/0 Cable, 3/8 in Capacity, 10 1/2 in L

Twister Electrode Holders, 250A, Nylon/Glass, For 3/0 Cable, 3/16" Capacity, 8"L

Twister Electrode Holders, 400 A, For 3/0 Cable, 1/4 in Capacity, 8 15/16 in L