Techniweld
Weld Shop Supply
TWECO
Direct Wire & Cable
Weldcote
Metal Power
Inweld
CGW
Chem Star
Badassreels
Inweld - Masterweld
Victor
Caiman
CK Worldwide
DeWALT
Fibre-Metal
Jackson Safety
Jackson SureWerx
Lenco
Flange Wizard
Mathey Dearman
Weiler
Shurlite
Steiner
Tempil
Esab
Western Enterprises
Walter
Tillman
Lincoln Electric
Tweco 54A Gas Diffuser 5 Pack
$9.99
54A Tweco Style Gas Diffuser #3 & #4 Mig Gun Fits 24A, 24CT, & 23 Series54A Tweco Style Gas Diffuser #3 & #4 Mig GunFits 24A, 24CT, & 23 Series
Tweco Style 3550 Mig Diffuser Lincoln 100
$6.67
Premium quality Tweco® style 35-50 gas diffuser.
For use with thread-on nozzle assemblies with 200 A Tweco® Mini-MIG-Gun®.
Also fits Lincoln® Magnum 100L MIG guns; replacement for gas diffuser P/N: KP2040-1/KP35-50.
Works with 11 series contact tip in light duty welding application up to 200 A.
2 Per Package
Tweco Style Fixed Insulator Tweco No. 34ct
$9.99
34CT Tweco Nozzle Insulator 1340-140024CT Series Coarse Thread Nozzle - 1.070" (27.2 mm) Outside Diameter at the knurled flat section Use with Nozzle Insulator Part No. 34CT
Unmounted Flap Wheel Aluminum Oxide for Angle & Bench Grinders
from $16.90
Unmounted Flap Wheel for Weld Cleaning & Metal Polishing Applications fits Angle & Bench Grinders.
Weldcote Unmounted Flap Discs Aluminum Oxide For Weld Cleaning & Metal Polishing Applications
For use on standard 4-1/2" and 5" and 7" angle grinders
Applies a linear scratch pattern, instead of a swirl; narrow profile is excellent for cleaning weld beads
Suitable for surface preparation and cleaning, finishing, paint and rust removal
Increases the versatility of your angle grinder
Suitable For:• Ferrous Metals• Non-Ferrous Metals• Stainless Steel• Iron• Brass• Aluminum• Plastic• Wood• Rubber• Fiberglass
Uses Include:• Deburring• Deflashing• Cleaning weld lines and weld splatter• Removal of Rust• Blending• Finishing and Polishing• Light Grinding• Stock RemovalUse on:• Pedestal Grinder• Bench-Top Grinder• Straight Finishing Tool with 1 inch Arbor
Specs:• Dimensions = 6” (Diameter) x 2” (Wide) x 1” (Hole)• Max RPM = 6,000• Material = Aluminum Oxide• Grits = 40, 60, 80, 120 Grit available
Victor Short Barrel 8 1/2" MT-204A 2 Hose Machine Torch
$535.00
$699.99
Victor Short Barrel MT-204A 2 Hose Machine Torch
Description
MT 200 Series Two hose Machine Cutting Torch for use with acetylene and other pressurized gases. 7" cutting capacity. Use series 1-101 cutting tips. Supplied with Accessory Reverse Flow Check Valves, to be used on the torch inlet connections.
Victor Short Barrel Cutting Torch For use with track torches, Band beveling machines, Manual beveling machines by Mathey Dearman or H&M, Pipeliners and rig welders know and trust Victor Short Barrel Machine Torches the world over. Personally i prefer this to any other manufactured machine torch on the market. Pair the Short Barrel torch to our wide selection of 1-101 series cutting tips today at Weld Shop Supply, Free Shipping is included with the Victor Short Barrel Machine Torch. Two hose connection for use with manual beveling machines makes easy work of beveling pipe or use with a track torch cutting plate, Not for use on Plasma Tables or Burn tables, Please see our selection of 3 hose Machine Torches instead.
Specifications
Cut Capacity: 7"
Total Length: 8-1/2"
Barrel Length: 4-1/2"
Diameter: 1-3/8" Pre-Drilled Barrel
Lever Activated Oxygen Cutting Stream
Whenever using the Victor Short Barrel Torch pair it with the BHA-2 Adjustable Beveling Head for more clearance and easily adjustable angles when beveling pipe.
Pair both with Victor Style 1-118 Cutting Tips for the best clearance when beveling pipe using band type beveling machines.
VN Series HVAC Nitrogen-Purging Regulators/Flowmeters, Nitrogen, 3,000 psi, 35 CFH, CGA-580
$229.56
VN Series HVAC Nitrogen-Purging Regulators/Flowmeters, Nitrogen, 3,000 psi, 35 CFH, CGA-580
VN Series HVAC Nitrogen-Purging Regulators/Flowmeters, Nitrogen, 35 CFH, CGA-580
$218.00
VN Series HVAC Nitrogen-Purging Regulators/Flowmeters, Nitrogen, 35 CFH, CGA-580
Walter 4.5 in. 36 Grit Spin-On Flexcut Mill Scale Wheel (15L843)
from $7.60
Walter 4.5 in. 36 Grit Spin-On Flexcut Mill Scale Wheel (15L843)
Your days of problems removing mill scale are now over with Flexcut Mill Scale. No more glazing or clogging, just hassle-free removal of mill scale, leaving a clean and even surface.
Arbor: 5/8-11"
Max RPM: 13,300
Diamond-Cut pattern
High removal, cool grinding
One step finishing wheel
Increases productivity
Materials
Aluminum
Other Non-Ferrous metals
Steel
Stainless steel
Rusted steel
Mill scale
Applications
Grinding various metals without gouging
Working on curved surfaces
Remove mill scale and leaving a smooth finish
Walter 4.5 in. 40 Grit Spin-On Enduro-Flex Stainless Flap Disc (06F454)
from $13.55
Walter 4.5 in. 40 Grit Spin-On Enduro-Flex Stainless Flap Disc (06F454)
One step finishing solution to reduce cost- Quiet, vibration-free grinding- Raised hub fits all standard grinder back flanges- Eco-Trim™ trimmable backing extends disc life by up to 3 times- Safe and easy to trim- Superior performance, cool cutting, non-loading - Max 13,300 - Spin on
Made from natural and sustainable plant fibers, the ECO-TRIM backing can easily be trimmed for higher productivity, maximum operator safety and comfort as well as protect our environment.
Features
One step finishing solution to reduce cost
Quiet, vibration-free grinding
Raised hub fits all standard grinder back flanges
Superior performance, cool cutting, non-loading
Eco-Trim™ trimmable backing extends disc life by up to 3 times
Safe and easy to trim
Materials
Aluminum
Stainless steel
Non-ferrous metals
Applications
Grinding and finishing welds
Surface finishing
Tips
Always use a back flange
Backing can be trimmed for working in corners
Walter 4.5 in. 60 Grit Spin-On Enduro-Flex Stainless Flap Disc (06F456)
from $13.55
Walter 4.5 in. 60 Grit Spin-On Enduro-Flex Stainless Flap Disc (06F456)
One step finishing solution to reduce cost- Quiet, vibration-free grinding- Raised hub fits all standard grinder back flanges- Eco-Trim™ trimmable backing extends disc life by up to 3 times- Safe and easy to trim- Superior performance, cool cutting, non-loading - Max 13,300 - Spin on
Made from natural and sustainable plant fibers, the ECO-TRIM backing can easily be trimmed for higher productivity, maximum operator safety and comfort as well as protect our environment.
Features
One step finishing solution to reduce cost
Quiet, vibration-free grinding
Raised hub fits all standard grinder back flanges
Superior performance, cool cutting, non-loading
Eco-Trim™ trimmable backing extends disc life by up to 3 times
Safe and easy to trim
Materials
Aluminum
Stainless steel
Non-ferrous metals
Applications
Grinding and finishing welds
Surface finishing
Tips
Always use a back flange
Backing can be trimmed for working in corners
Walter 4.5 in. 80 Grit Spin-On Enduro-Flex Stainless Flap Disc (06F458)
from $13.55
Walter 4.5 in. 80 Grit Spin-On Enduro-Flex Stainless Flap Disc (06F458)
One step finishing solution to reduce cost- Quiet, vibration-free grinding- Raised hub fits all standard grinder back flanges- Eco-Trim™ trimmable backing extends disc life by up to 3 times- Safe and easy to trim- Superior performance, cool cutting, non-loading - Max 13,300 - Spin on
Made from natural and sustainable plant fibers, the ECO-TRIM backing can easily be trimmed for higher productivity, maximum operator safety and comfort as well as protect our environment.
Features
One step finishing solution to reduce cost
Quiet, vibration-free grinding
Raised hub fits all standard grinder back flanges
Superior performance, cool cutting, non-loading
Eco-Trim™ trimmable backing extends disc life by up to 3 times
Safe and easy to trim
Materials
Aluminum
Stainless steel
Non-ferrous metals
Applications
Grinding and finishing welds
Surface finishing
Tips
Always use a back flange
Backing can be trimmed for working in corners
Walter ALU 08L450 - 4.5 in. x 1/4 x 7/8 in, Type 27S High Removal Grinding Wheel
from $7.50
Walter ALU 08L450 - 4.5 in. x 1/4 x 7/8 in, Type 27S High Removal Grinding Wheel
These wheels will not clog or glaze when working with aluminum or other non-ferrous metals. The are free of waxes and lubricants, so there is no need to clean the surface before welding or applying coating, eliminating a time-consuming step in surface preparation.
Type 27 grinding wheel
7/8" arbor
Max RPM: 13,300
Grade: A-24-ALU
Fast and free cutting
May be used for intermittent light grinding
Materials
Aluminum
Applications
Cutting
Light grinding
Walter XCAVATOR 4.5 in. x 1/4 x 7/8 in, Type 27S High Removal Grinding Wheel
from $9.05
Walter XCAVATOR 4-1/2 in. x 1/4 x 7/8 in, Type 27S High Removal Grinding Wheel
This wheel has been redesigned to incorporate the latest innovation in Type 27 depressed center grinding wheels. The new technology in the hub of the wheel helps to minimize vibration, providing the operator with more comfortable, ergonomic work conditions without sacrificing productivity. This wheel delivers premium performance, the highest removal rate in steel and stainless steel and can confront some of the industry's toughest metals, such as tungsten carbide and quenched and tempered steel. Eliminate bottlenecks in your production process and reduce the amount of time spent grinding with this new and improved model technologies.
Exceptional performance, highest productivity
Fe-free formulation (guaranteed not to contaminate stainless steel)
Ultra-high removal rate
For use on: alloys, cast iron, stainless steel, tungsten, hard metal
Walter ZIP ALU 4.5 in. x 7/8 in. Arbor x 3/64 in. T1 Cutting Wheel for Aluminum
from $4.90
Walter Zip Wheel 4.5 in. x 7/8 in. Arbor x 3/64 in. GR 36/60, Cut-Off Wheel
This wheel is designed to provide long life and quick cuts on aluminum and other non-ferrous alloys. Special abrasive blend provides smooth, cool cuts and is guaranteed not to clog, saving you time and money. Best wheel life and extra fast cutting in aluminum and other non-ferrous alloys.
Also cuts all ferrous metals
Excellent wheel life
Fast cutting in aluminum and non-ferrous metals
Unique formulation guarantees no clogging
For use on: aluminum