Jackson SureWerx (19)

This is a compact and timesaving tool that can be used to lay out pipe and structural steel joints.Laterals at any angle, tees, wyes, crosses, elbows - any type or size of joint can be quickly and precisely laid out.No more complicated mathematical formulas, no more cut and try, and no more needless material waste. The #1 Contour Marker consists of an X-shaped frame, calibrated protractor, and a triple-jointed marketing arm and holder. The holder accepts a soapstone crayon, felt pen, or pencil. The frame folds into a compact tool that fits into a pocket or tool kit, and it can be used upside down or right side up. The protractor is calibrated on both sides - one in degrees and one in rise-inches-per foot.

The Jackson Safety Pipe Flange Aligner (#10) is a self-determining flange aligning tool that allows quick and accurate measuring. The aligner inserts easily into the pipe, centers snugly against the pipe"™s inside diameter, and automatically aligns with the pipe access. It"™s a manual tool that takes the guess work out of pipe construction. Made of durable and lightweight aluminum Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs All models of the flange aligning tools will two-hole (make 2 holes of the flange horizontally level with the ground and vertically level the face of the flange in one step.) Adjustable for pipes and flanges from 3 to 12 inches in diameter

Designed for use with a burning torch or as a straight edge, the magnetic burning guide is constructed with highly durable materialto withstand both heat and spatter.The tool"™s base has three 30-pound pull cast-in magnets for use in any position.A 24-inch blade on a raised plane is standard.

Flange Aligner Bases, Aluminum

The Curv-O-Mark Universal Level (#33) is a must have multipurpose tool.Featuring a 360-degree adjustable protractor dial bubble(DSL,) the level has two cast-in 25-pound magnets to securely hold the unit in place on any steel surface including the undersideof a pipe or beam.This permits hands free leveling, even in the tight spots.The bubble is mounted on a protractor dial, so it canbe used in any position and still maintain accurate readings.Both faces of the level have deep, cast-in grooves for self-centeringon the contour of the pipe and because the magnets are cast-in, they won"™t interfere with the use of the level on nonmagnetic materials. For aligning pipe flanges (two holing,) the universal level comes with a two threaded, self-aligning conical spacer andconical nut and bolt units

The Jackson Safety Jumbo Contour Marker (#4) is a timesaving tool used to lay out pipe and structural steel joints.Laterals at any angle, tees, wyes, crosses, elbows - any type or size of joint can be quickly and precisely laid out.No more complicated mathematical formulas, no more cut and try, and no more needless material waste.The Jumbo Contour Marker can be used to lay out pipe from 8 to 48 inches in diameter or structural steel members up to 18 inches.It consists of an X-shaped frame, calibrated protractor, and a triple-jointed marking arm and holder.The holder accepts a soapstone crayon and comes with a durable web strap to hold the unit in place, and a built-in dial bubble to find an accurate center location.The frame folds into a compact tool that fits into a pocket or tool kit, and it can be used upside down or right side up.The protractor is calibrated on both side - on in degrees and one in rise-inches per foot.

Aids in the setting of center lines, establishing angles and marks for butt-ins, location points inside pipes and tanks, laying out key ways, and measuring declivity.The standard head model is used on 1/2" diameter pipe and up. It features a 4" Y type head fitted with an adjustable dial bubble proractor (DSL.) Use a tapping hammer to operate the hardened centering pin.

Aids in the setting of center lines, establishing angles, and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. Jumbo centering head is ideal for 1" pipe diameter and up and has an 8" Y-type head and a DSL. A spring loaded hardened centering pin eliminates the need for a hammer.

The Curv-O-Mark Pro-Mag Level is a lightweight and easy to use tool for pipe fitters, welders, jig builders, or anyone determining angles. It has two cast-in 25-pound pull magnets that hold securely to any steel surfaces. The unit has a 360-degree adjustable dial set level with two 90-degree quadrants in 2.5 degree increments. A groove on the bottom edge permitsuse on a small pipe. Made of durable and lightweight cast aluminum 360° adjustable DSL Measures 9" long x 2" high and 3/4" thick

Made with an anodized rust proof aluminum for lasting protection Arms are precisely aligned with spring tension joints to guarantee accuracy and rigidity Holder accommodates flat or round soapstone and pencils Folding type design. Mini, small, and standard models will fit conveniently in a shirt pocket

The Dial Set Level is an adjustable bubble protractor used with a number of popular Jackson Safety Curv-O-Mark tools, including #4, #6, #7, #8, #20, and #33. The protractor covers 180 degrees thru 2 90-degree quadrants. The bubble is cast in the aluminum dial for durability. Made of durable lightweight cast aluminum Reads in 2.5-degree increments Protractor covers 180-degrees thru two 90-degree quadrants

Custom-fit Replacement Headgear, Pipeliner, for Pipeliner Welding Helmet

Jackson 2" x 4.25" Polycarbonate Welding Lens Safety Plate 16073 Clear Plastic Welding Lens  Product Details: Replacement safety plates for welding helmets Durable polycarbonate construction Scratch-resistant Lightweight

HLX 100 Halo Welding Helmet Magnifier Lens Holder Cheater Lens Adapter 15974

Jackson Nexgen Welding Helmet W60 NEXGEN Digital Auto-Darkening Filters, Lithium Batteries Jackson Safety Jackson Welding Helmet Replacement BatteriesProduct Details:Genuine Jackson CR2450 lithium replacement batteries for Jackson NexGen and Insight auto-darkening welding lensesBatteries provide up to 800 hours of use.