-15% sale
1/0 Yellow Welding Cable Ultimate Flex USA Fine Strand 250' Reel
1/0 Yellow Welding Cable Ultimate Flex USA Fine Strand 250' Reel $999.00 $1,170.00
Premium American-made welding cableAvailable in custom-cut sections fully assembled with endsStrong EPDM jacket resistant to tears, cuts, abrasion, slag and impactSpecial stranded conductor maintains flexibility, even at cold temperatures up to -50°COur high-quality custom cable kits are RoHS compliant, lead-free and silicone-freeSuperior resistance to heat, water, grease, solvents, weather and ozoneSequentially marked with Class-K stranding
-8% sale
Eliminator EL52CT-16 Gas Diffuser, Brass, Eliminator - 1560-1107
1560-1107 Tweco® 16RS 16S Gas Diffuser, 2.297 Inch 5 Pack $91.85 $98.79
Tweco® 16RS/S Series Standard Duty Brass Gas Diffuser is perfect for use with slip-on nozzle assemblies with 350 A Tweco® Spray Master® MIG gun series as well as eliminator front-end consumables. Gas diffuser has magnificent electrical properties making it ideal for use in light to medium duty standard welding application up to 350 A. 2.297" Gas diffuser with M11 x 1.5-6g thread size has six 0.094" gas holes. It features part number rolled stamped on the external surface and overall length with replacement O-ring number for easy identification. Gas diffuser is made from 360-brass alloy bar stock offers consistent dimensional stability. It has a proper threaded size conductor tube to be used with MIG guns. It features a silicon O-ring to provide secure sealing against the nozzle assembly. Gas diffuser offers the OD course threads so that the nozzle assembly can come with the conductor tube. Gas diffuser is sold as 5 per pack. KEY FEATURES Easy identification - part no rolled stamped on the outside surface Designed to be used with course thread nozzle assemblies Gas diffuser provides the OD course threads so that the nozzle assembly can attach to the conductor tube Gas diffuser has a silicon o-ring to seal against the nozzle assembly Machined from 360 brass alloy bar stock to ensure consistent dimensional stability Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch) Flush tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace Replacement O-ring Part No EL52-1 (Stock No 1560-1108) Standard Duty M11 x 1.5-6G Male threaded Applications Used in light to medium duty welding application up to 350 Amp Series 16RS; 16S Tip Length 2.297 Inch MIG Gun Model Tweco®; Tweco® 350 Spray Master® Hazardous No Pack 5/Pack
7% sale
Eliminator EL54-SW Gas Diffuser, Brass, Eliminator - 5 Per Pack - 1560-1114
1560-1114 Tweco® 14H M12 Gas Diffuser Eliminator 5 Pack $87.77 $81.27
Tweco® Eliminator® Series Brass Gas Diffuser is perfect for use with course thread nozzle assemblies with 600 A Tweco® Eliminator® MIG gun series as well as eliminator front-end consumables. Gas diffuser has magnificent electrical properties making it ideal for use in medium to heavy duty standard welding application up to 600 A. 2.521" Gas diffuser with M12 x 1.5-6g thread size has six 0.094" gas holes. It features conduit liner up to 5/64" wire with a silicon O-ring to provide secure sealing against the nozzle assembly. It features a course thread that is machined on the external surface to let the nozzle assemblies to thread over and accommodate the nozzle in place during the welding process. It features part number rolled stamped on the external surface and overall length with replacement O-ring number for easy identification. Gas diffuser is made from 360-brass alloy bar stock offers consistent dimensional stability. It has a proper threaded size conductor tube to be used with MIG guns. Gas diffuser is sold as 5 per pack. KEY FEATURES Easy identification - part no rolled stamped on the outside surface Designed to be used with course thread nozzle assemblies Machined from 360 brass alloy bar stock to ensure consistent dimensional stability Gas diffuser provides the od course threads so that the nozzle assembly can attach to the conductor tube Gas diffuser has a silicon O-ring to seal against the nozzle assembly Replacement O-ring Part No EL52-1 (Stock No 1560-1108) Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch) Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace Applications Used in medium to heavy duty welding application up to 600 Amp Series 14H; M12 Wire Size 0.078 Inch Tip Length 2.521 Inch MIG Gun Model Tweco®; Tweco® 450 Eliminator® Hazardous No Pack 5 Each
-14% sale
2/0 Yellow Welding Cable Ultimate Flex USA Fine Strand 250' Reel
2/0 Yellow Welding Cable Ultimate Flex USA Fine Strand 250' Reel $1,256.00 $1,460.00
Premium American-made welding cableAvailable in custom-cut sections fully assembled with endsStrong EPDM jacket resistant to tears, cuts, abrasion, slag and impactSpecial stranded conductor maintains flexibility, even at cold temperatures up to -50°COur high-quality custom cable kits are RoHS compliant, lead-free and silicone-freeSuperior resistance to heat, water, grease, solvents, weather and ozoneSequentially marked with Class-K stranding
-14% sale
2/0 Yellow Welding Cable Ultimate Flex USA Fine Strand 250' Reel
2/0 Yellow Welding Cable Ultimate Flex USA Fine Strand 250' Reel $1,256.00 $1,460.00
Premium American-made welding cableAvailable in custom-cut sections fully assembled with endsStrong EPDM jacket resistant to tears, cuts, abrasion, slag and impactSpecial stranded conductor maintains flexibility, even at cold temperatures up to -50°COur high-quality custom cable kits are RoHS compliant, lead-free and silicone-freeSuperior resistance to heat, water, grease, solvents, weather and ozoneSequentially marked with Class-K stranding
-15% sale
220 Volt Extension Cord 8/3 25 Foot Extension Cord Molded Connectors
220 Volt Extension Cord 8/3 25 Foot Extension Cord Molded Connectors $199.00 $233.13
Rugged Flexible Jacket Durable, Molded on Connectors Made In the USA Resists Abrasion and Water Contractor Aproved Nema 6-50 Plug to Nema 6-50 Receptacle 8/3 Welding Machine Cord Designed for indoor and outdoor heavy industrial use. Meets or exceeds al UL and OSHA standards and requirements Great for MIG, Tig, or Stick Welders HIghly flexible 30 Gauge bare copper wire, insulated with an STW water resistant jacket. Operating temperatures range from -40C to +90 C (-40F to 194F). 250 Volt 50 AMP rating.
220 Volt Extension Cord 8/3 50 Foot Extension Cord Molded Connectors
220 Volt Extension Cord 8/3 50 Foot Extension Cord Molded Connectors $372.43
Rugged Flexible Jacket Durable, Molded on Connectors Made In the USA Resists Abrasion and Water Contractor Aproved Nema 6-50 Plug to Nema 6-50 Receptacle 8/3 Welding Machine Cord Designed for indoor and outdoor heavy industrial use. Meets or exceeds al UL and OSHA standards and requirements Great for MIG, Tig, or Stick Welders HIghly flexible 30 Gauge bare copper wire, insulated with an STW water resistant jacket. Operating temperatures range from -40C to +90 C (-40F to 194F). 250 Volt 50 AMP rating.
230v/115v Power Adaptor
230v/115v Power Adaptor $20.88
115 Volt to 220 Volt Power Cable adapter.
25' 3/16
25' 3/16" Grade R Acetylene Twin Hose Siamese Hose Oxygen Acetylene $22.99
Oxygen Acetylene Hose 25' Grade R Techniweld Hose.
3 Series Victor Style Cutting Torch Tips
3 Series Victor Style Cutting Torch Tips $12.99
3 Series Victor Style Acetylene Cutting Torch Tips  Use with 3 series Victor Style Cutting Torches Acetylene Gas Use 3 Series Victor style cutting torch tip #000 to cut up to 1/8" Steel with oxygen pressure of 25 pounds and acetylene pressure of 4 pounds with a speed of 25 inches per minute producing a .04" thick kerf width. Use 3 Series Victor Style cutting torch tip #00 to cut up to 1/4" Steel with oxygen pressure of 25 pounds and acetylene pressure of 4 pounds with a speed of 28 inches per minute producing a .05" thick kerf width. Use 3 Series Victor Style cutting torch tip #0 to cut up to 1/2" Steel with oxygen pressure of 30 pounds and acetylene pressure of 4 pounds with a speed of 22 inches per minute producing a .06" thick kerf width.  Use 3 Series Victor Style cutting torch tip #1 to cut up to 3/4" Steel with oxygen pressure of 38 pounds and acetylene pressure of 5 pounds with a speed of 20 inches per minute producing a .07" thick kerf width.  Use 3 Series Victor Style cutting torch tip #2 to cut up to 1" Steel with oxygen pressure of 37 pounds and acetylene pressure of 6 pounds with a speed of 17 inches per minute producing a .09" thick kerf width. Use 3 Series Victor Style cutting torch tip #3 to cut up to 2" Steel with oxygen pressure of 42 pounds and acetylene pressure of 8 pounds with a speed of 13 inches per minute producing a .11" thick kerf width. Use 3 Series Victor Style cutting torch tip #4 to cut up to 3" Steel with oxygen pressure of 45 pounds and acetylene pressure of 8 pounds with a speed of 10 inches per minute producing a .12" thick kerf width. Follow manufacturers recommended safety specifications whenever using cutting torches and flammable gases.  At no time should the withdrawal rate of an individual cylinder of acetylene exceed 1/7th of the contents per hour. If additional flow is required use and acetylene manifold system of sufficient size to supply the necessary volume.  Choose appropriate torch hoses and flow rates when using cutting torch tips.           
40.022 Swivel Bad Ass Reels
40.022 Swivel Bad Ass Reels $48.32
Replacement Swivel for Bad Ass Reels
4043 Mig Aluminum Wire .035
4043 Mig Aluminum Wire .035" X 16 Pound Spool $225.76
Weldcote 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in Spools or cut lengths for MIG or TIG welding processes. 4043 aluminum filler metal is recommended for welding 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. The melting range is 1065-1170?F with a density of .097 lbs./cu.in. The average tensile strength is 27,000 psi, average yield strength of 18,000 psi and the post anodizing color is gray. 4043 aluminum filler metal is one of the oldest and most widely used welding and brazing alloys. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders.
4043 Mig Aluminum Wire 1/16
4043 Mig Aluminum Wire 1/16" X 16 Pound Spool $225.76
Weldcote 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in Spools or cut lengths for MIG or TIG welding processes. 4043 aluminum filler metal is recommended for welding 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. The melting range is 1065-1170?F with a density of .097 lbs./cu.in. The average tensile strength is 27,000 psi, average yield strength of 18,000 psi and the post anodizing color is gray. 4043 aluminum filler metal is one of the oldest and most widely used welding and brazing alloys. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders.
4043 Mig Aluminum Wire 3/64
4043 Mig Aluminum Wire 3/64" X 16 Pound Spool $225.76
Weldcote 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in Spools or cut lengths for MIG or TIG welding processes. 4043 aluminum filler metal is recommended for welding 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. The melting range is 1065-1170?F with a density of .097 lbs./cu.in. The average tensile strength is 27,000 psi, average yield strength of 18,000 psi and the post anodizing color is gray. 4043 aluminum filler metal is one of the oldest and most widely used welding and brazing alloys. The silicon additions result in improved fluidity (wetting action) to make the alloy a preferred choice by welders.

Check Out Badassreels 8 Slot Black Reels!

Bad Ass Welding Products

Family Owned Small Business

Can't find it?

Contact us and we'll get it!