0700000802 ESAB® Sentinel A50 Front Cover Lens, Clear, 5/ Pack
$34.99
$38.86
ESAB® Sentinel™ A50 Front Cover Lens; Color: Clear, Pkg Qty: 5/Pack, Designed to fit the ESAB® Sentinel™ A50 Welding Helmet.
Description
Clear 5 pack of front cover lens for ESAB Sentinel A50 Welding Helmet
0700000803 ESAB® Sentinel™ A50 Amber Front Lens Cover
$43.74
$69.99
ESAB® Sentinel™ A50 Amber Front Lens Cover; Color: Clear, Pkg Qty: 5/Pack, Designed to fit the ESAB® Sentinel™ A50 Welding Helmet.
ESAB Amber lenses 0700000803 for the Sentinel Welding Helmet. The sweeping design across the helmet allows more natural light to get in when welders are in grind mode, ultimately increasing visibility and clarity. Package of 5.
Arcair Gouging Electrodes, Pointed Copperclad AC, 3/8 x 12 - 50 Pcs 20063003
$48.58
$44.99
Arcair Gouging Electrodes, Pointed Copperclad AC, 3/8 x 12 - 50 Pcs 20063003
POINTED COPPERCLAD DC ELECTRODESA standard, all purpose gouging electrode. Its controlled copper coating improves electrical conductivity (for more efficient, cooler operation) and helps maintain electrode diameter at the point of the arc.POINTED PLAIN DC ELECTRODESGeneral purpose electrodes without the copper plating to avoid any chance of copper contamination in the base material. Same high quality blend of carbon and graphite used in other electrodes.POINTED COPPERCLAD AC ELECTRODESDesigned for use with A.C. power supplies. Rare earth material is added to the electrodes to stabilize the arc and enhance the operating characteristics. 305 mm (12 in.) long.FLAT COPPERCLAD DC ELECTRODESSpecially designed for close tolerance metal removal and scarfing applications. Excellent for general gouging applications, removing weld crowns, repairing or making dies, removing temporary welded dogs, and scarfing billets.HALF ROUND COPPERCLAD DC ELECTRODESVersatility of having both a round and flat electrode for the various gouging applications. Excellent for removing weld crowns, repairing or making dies, removing temporary welded dogs, and scarfing billets.
Designed specifically for the air carbon-arc process
Contain a precise formulated blend of carbon and graphite
Produces the most efficient metal removal performance in today’s market
Superior metal removal rates, cool operation, and uniform diameters
Ideal for a broad range of applications
Creating u-grooves for weld joint
Removing old welds
Gouging out cracks
Cleaning and repairing castings
Removing hard surface material
Rough machining
Arcair Slice Battery Pack, 120V AC 50/60 Hz - 63991041
$2,639.72
SLICE Battery Pack –110 V AC 60 Hz 63991041
This unit sucks, dont buy it, Esab wont warranty the battery.
Go anywhere and cut, burn, or pierce virtually any metallic, non-metallic or composite material with this exothermic cutting pack.
Comes with all the necessary equipment and cutting rods required to do cutting when combined with standard industrial grade oxygen to support the exothermic reaction and to remove the molten metal.
Product Features:
New heavy-duty storage case to hold/store the equipment when not in use.
Improved torch handle & rubber shield to improve the operators grip and provide protection from molten spray when piercing.
Improved striker assembly that incorporates a slide mechanism that allows the operator to only expose a small portion of the ignition bar (copper) which increases the life of the striker copper bar.
Battery Pack Features:
Improved battery box with improved features over previous model
Faster recharging of dead battery
Better visual "gas gauge" indicating battery condition
Over-charging safe guard
Industries
Industrial and General Fabrication
Mining
Repair and Maintenance
Steel Erectors
Atom Arc 7018 Stick Welding Electrodes 50 Pound Can 1/8"
$185.20
Atom Arc 7018-M is a low hydrogen, iron powder all-position electrode specially formulated to meet the more stringent requirements of Military Specification MIL-E-0022200/10 for mechanical properties, low coating moisture, and diffusible hydrogen content.Atom Arc 7018-M is intended for welding carbon steels, as well as high tensile steels, such as Grade HT of MIL-S-16113 and MIL-S-22698. It is also used for attachment welds to HY-80 and HY-100.
Typical Charpy V-Notch Properties
Stress Relieved
Impact Value
166 ft-lb
Impact Value
225 J
1150 °F
621 °C
1 hr
Testing Temperature
-20 °F
Testing Temperature
-29 °C
Typical Tensile Properties
Condition
Stress Relieved
As Welded
Atom Arc 7018 Stick Welding Electrodes 50 Pound Can 3/16"
$189.90
Atom Arc 7018-M is a low hydrogen, iron powder all-position electrode specially formulated to meet the more stringent requirements of Military Specification MIL-E-0022200/10 for mechanical properties, low coating moisture, and diffusible hydrogen content.Atom Arc 7018-M is intended for welding carbon steels, as well as high tensile steels, such as Grade HT of MIL-S-16113 and MIL-S-22698. It is also used for attachment welds to HY-80 and HY-100.
Typical Charpy V-Notch Properties
Stress Relieved
Impact Value
166 ft-lb
Impact Value
225 J
1150 °F
621 °C
1 hr
Testing Temperature
-20 °F
Testing Temperature
-29 °C
Typical Tensile Properties
Condition
Stress Relieved
As Welded
Atom Arc 7018 Stick Welding Electrodes 50 Pound Can 3/32"
$196.65
Atom Arc 7018-M is a low hydrogen, iron powder all-position electrode specially formulated to meet the more stringent requirements of Military Specification MIL-E-0022200/10 for mechanical properties, low coating moisture, and diffusible hydrogen content.Atom Arc 7018-M is intended for welding carbon steels, as well as high tensile steels, such as Grade HT of MIL-S-16113 and MIL-S-22698. It is also used for attachment welds to HY-80 and HY-100.
Typical Charpy V-Notch Properties
Stress Relieved
Impact Value
166 ft-lb
Impact Value
225 J
1150 °F
621 °C
1 hr
Testing Temperature
-20 °F
Testing Temperature
-29 °C
Typical Tensile Properties
Condition
Stress Relieved
As Welded
Atom Arc 7018 Stick Welding Electrodes 50 Pound Can 5/32"
$181.70
Atom Arc 7018-M is a low hydrogen, iron powder all-position electrode specially formulated to meet the more stringent requirements of Military Specification MIL-E-0022200/10 for mechanical properties, low coating moisture, and diffusible hydrogen content.
Atom Arc 7018-M is intended for welding carbon steels, as well as high tensile steels, such as Grade HT of MIL-S-16113 and MIL-S-22698. It is also used for attachment welds to HY-80 and HY-100.
Typical Charpy V-Notch Properties
Stress Relieved
Impact Value
166 ft-lb
Impact Value
225 J
1150 °F
621 °C
1 hr
Testing Temperature
-20 °F
Testing Temperature
-29 °C
Typical Tensile Properties
Condition
Stress Relieved
As Welded
ESAB 308L-16 Stainless Stick Electrodes 1/8" 10-lb Can
$117.87
$124.00
Arcaloy 308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of Types 321 and 347 stainless steels provided the service temperature is less than about 700°F (375°C). The basic-rutile thin coating of Arcaloy 308L-16 gives an excellent combination of welding performance in all positions and a high resistance to cracking. Operates on AC or DC current.
Industries
Tank and Vessel Fabrication
Ship/Barge Building
Industrial and General Fabrication
Petrochemical
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
45 %
90 ksi
66 ksi
Typical Weld Metal Analysis %
weld metal analysis
Mn
Mo
Cu
C
Si
Ferrite
Ni
Cr
1.70 %
0.10 %
0.10 %
0.03 %
0.50 %
6 FN %
10 %
20 %
Approvals:
CWB; CSA W48 E308L-16; QPL-22200/2; MIL-308L-16
Classifications:
AWS A5.4; E308-16/E308L-16
Approvals are based on factory location. Please contact ESAB for more information.
ESAB 308L-16 Stainless Stick Electrodes 3/32" 10-lb Can
$125.50
$132.20
Arcaloy 308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of Types 321 and 347 stainless steels provided the service temperature is less than about 700°F (375°C). The basic-rutile thin coating of Arcaloy 308L-16 gives an excellent combination of welding performance in all positions and a high resistance to cracking. Operates on AC or DC current.
Industries
Tank and Vessel Fabrication
Ship/Barge Building
Industrial and General Fabrication
Petrochemical
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
45 %
90 ksi
66 ksi
Typical Weld Metal Analysis %
weld metal analysis
Mn
Mo
Cu
C
Si
Ferrite
Ni
Cr
1.70 %
0.10 %
0.10 %
0.03 %
0.50 %
6 FN %
10 %
20 %
Approvals:
CWB; CSA W48 E308L-16; QPL-22200/2; MIL-308L-16
Classifications:
AWS A5.4; E308-16/E308L-16
Approvals are based on factory location. Please contact ESAB for more information.
ESAB 308L-16 Stainless Stick Electrodes 5/32" 10-lb Can
$117.87
$124.00
Arcaloy 308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of Types 321 and 347 stainless steels provided the service temperature is less than about 700°F (375°C). The basic-rutile thin coating of Arcaloy 308L-16 gives an excellent combination of welding performance in all positions and a high resistance to cracking. Operates on AC or DC current.
Industries
Tank and Vessel Fabrication
Ship/Barge Building
Industrial and General Fabrication
Petrochemical
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
45 %
90 ksi
66 ksi
Typical Weld Metal Analysis %
weld metal analysis
Mn
Mo
Cu
C
Si
Ferrite
Ni
Cr
1.70 %
0.10 %
0.10 %
0.03 %
0.50 %
6 FN %
10 %
20 %
Approvals:
CWB; CSA W48 E308L-16; QPL-22200/2; MIL-308L-16
Classifications:
AWS A5.4; E308-16/E308L-16
Approvals are based on factory location. Please contact ESAB for more information.
ESAB 316LF5-16 Stainless Stick Electrodes 1/8" 10-lb Can
$152.07
$159.80
Arcaloy 316LF-15 is a 316L electrode designed to give a weld deposit with a minimum ferrite number of 5 FN. Carbon content is 0.04% maximum and can be used to weld Type 304L stainless steel where the presence of molybdenum is not detrimental.
Industries
Petrochemical
Industrial and General Fabrication
Food and Beverage
Chemical Industry
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
40 %
81 ksi
62 ksi
Typical Weld Metal Analysis %
weld metal analysis
Mn
Mo
Cu
C
Si
Ferrite
Ni
Cr
1.50 %
2.40 %
0.20 %
0.03 %
0.50 %
6 FN %
12 %
19 %
Approvals:
QPL-22200/2; MIL-316L-15
Classifications:
AWS A5.4; E316-15/E316L-15
Approvals are based on factory location. Please contact ESAB for more information.
ESAB 316LF5-16 Stainless Stick Electrodes 3/32" 10-lb Can
$159.97
$168.40
Arcaloy 316LF-15 is a 316L electrode designed to give a weld deposit with a minimum ferrite number of 5 FN. Carbon content is 0.04% maximum and can be used to weld Type 304L stainless steel where the presence of molybdenum is not detrimental.
Industries
Petrochemical
Industrial and General Fabrication
Food and Beverage
Chemical Industry
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
40 %
81 ksi
62 ksi
Typical Weld Metal Analysis %
weld metal analysis
Mn
Mo
Cu
C
Si
Ferrite
Ni
Cr
1.50 %
2.40 %
0.20 %
0.03 %
0.50 %
6 FN %
12 %
19 %
Approvals:
QPL-22200/2; MIL-316L-15
Classifications:
AWS A5.4; E316-15/E316L-15
Approvals are based on factory location. Please contact ESAB for more information.
ESAB 316LF5-16 Stainless Stick Electrodes 5/32" 10-lb Can
$152.07
$159.80
Arcaloy 316LF-15 is a 316L electrode designed to give a weld deposit with a minimum ferrite number of 5 FN. Carbon content is 0.04% maximum and can be used to weld Type 304L stainless steel where the presence of molybdenum is not detrimental.
Industries
Petrochemical
Industrial and General Fabrication
Food and Beverage
Chemical Industry
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
40 %
81 ksi
62 ksi
Typical Weld Metal Analysis %
weld metal analysis
Mn
Mo
Cu
C
Si
Ferrite
Ni
Cr
1.50 %
2.40 %
0.20 %
0.03 %
0.50 %
6 FN %
12 %
19 %
Approvals:
QPL-22200/2; MIL-316L-15
Classifications:
AWS A5.4; E316-15/E316L-15
Approvals are based on factory location. Please contact ESAB for more information.
ESAB 7018 Acclaim Stick Electrodes 1/8" 10-lb Can
$40.40
$43.00
Atom Arc 7018 Acclaim offers softer arc and excellent mechanical properties compared to the original Atom Arc 7018. Results include greater puddle control for ease of use in out-of-position welding applications and superior arc initiation desired by many newer welders. Both novice and seasoned welders can appreciate its excellent weld performance, wide operating range and easy clean up. Greater puddle control resulting in easier out-of-position welds, superior arc initiation and ease of use with wider operating range and minimal clean-up
Where To Buy
Industries
Civil Construction
Mobile Equipment
Ship/Barge Building
Bridge Construction
Railcars
Automotive
Industrial and General Fabrication
Welding Process
SMAW/MMA (Stick)
Typical Tensile Properties
Condition
Elongation
Tensile Strength
Yield Strength
As Welded
32 %
87 ksi
72 ksi
As Welded
36 %
79 ksi
65 ksi
Typical Charpy V-Notch Properties
Condition
Impact Value
Testing Temperature
As Welded
85 ft-lb
-50 °F
As Welded
170 ft-lb
-20 °F
Typical Weld Metal Analysis %
weld metal analysis
P
Mn
C
S
Si
0.01 %
1.20 %
0.05 %
0.008 %
0.45 %
Approvals:
LR; 4Ym (H5); ABS; 4Y (H5)/AWS A5.1: E7018-1 H4R; DNV/GL; 4Y (H5); CWB CSA W48; E4918-1-H4
Classifications:
AWS A5.1; E7018 H4R; ASME SFA 5.1; AWS A5.1; E7018-1 H4R
Approvals are based on factory location. Please contact ESAB for more information.
Coating Type:
Low-hydrogen iron powder
CTOD-Tested:
False
Welding Current:
AC or DC+